Caravan door holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small but very useful part of my caravan which was broken. It keeps the door opened with no wind trouble. I printed…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 876
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A small but very useful part of my caravan which was broken.
It keeps the door opened with no wind trouble.
I printed this with ASA material to keep it on long term, but you can use week material and print many parts, it's very fast.
Well, it's more energy consumption and the only good energy is the one we don't use.
Hope you enjoy.
Contact me if you want the original 3D model.
Edit: 06-27-2022 I had a break at the junction of vertical and horizontal parts (after 15 days of use and my very first ASA print). So I made a V2 which is 6mm thick instead of 4mm for the V1.Hope this will be stronger enough.
Category: Sport & Outdoors