1 / 6
Arms for LED strips, extension of Modular Hydroponic Tower Garden by boundarycondition — zdjęcie 1
1 / 6

Arms for LED strips, extension of Modular Hydroponic Tower Garden by boundarycondition

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extensions for adding LED strips on top of this hydroponic towerhttps://www.thingiverse.com/thing:3405964

Ocena
0 / 5
Polubienia
113
Pobrania
321
Wydruki
0
Wyświetlenia
4165
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Extensions for adding LED strips on top of this hydroponic tower by boundarycondition https://www.thingiverse.com/thing:3405964

Just print the parts and put it on top of tower.

The LED strips are sticked to the aluminium strip .

You will need:

  • 4x aluminium strip 15 x 2 x <height of your tower> mm
  • 4x M3 x 10 mm screws to mount aluminium strips to arms
  • 4x M4 x 12 mm screws to mount arms to center
  • I used ribbon cable to wire leds
  • Something to connect cables from arms to source

Printing:

  • 1x head
  • 4x arm
  • 4x wire holder
  • 4x end cover
  • Everything can be printed without supports!

Tagi