Wyze Cam Prusa Mount - 25mm taller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
User Gabe's excellent original design seemed a little short, so I increased the height of the platform 25mm using…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 162
- Wydruki
- 2
- Wyświetlenia
- 1256
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
User Gabe's excellent original design seemed a little short, so I increased the height of the platform 25mm using Blender.
The added height makes it a little easier to see items/edges of prints on the closest part of the print bed.
It might be worthwhile to go even taller - I tried 25mm because I was concerned the camera might bounce around during print moves, but it's not an issue at all.
Print instructions
The Wyze cam isn't very heavy so low infill % is OK.
I printed at 0.3mm DRAFT with Prusament PLA Galaxy Black default settings in PrusaSlicer, and it works great and sort of blends in with the rest of the printer.