Brother Scan N Cut DX mat support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extensions for the ScanNCut DX range to support cutting or scanning mat
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 1343
- Wydruki
- 5
- Wyświetlenia
- 5827
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
These extensions are to support the mats for the Brother ScanNCut DX range.
I recommend printing at 0.2mm layer height with 6 walls (to eliminate the need for infill) and also print with a brim as they are quite narrow. It's a quick and easy print for the no holes version but you may have to slow it down a touch for the holed versions.
Fits on an Ender 3 bed and should also fit on a Prusa i3.
If you found this model useful please click the 'like' button and upload a photo of your print. Also, comments and suggestions are always welcome.
I've included the .step and .f3d files for anyone that wants to modify the design.
Edit: Uploaded a version without the holes which should print a bit cleaner but will use a little more filament. Also uploaded a version with diamond shaped holes as suggested by user Gabe Yoder.