Brake Pipe Straightener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For straightening coiled 3/16" or 4.75mm brake lines.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 198
- Wydruki
- 4
- Wyświetlenia
- 1270
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple tool to straighten 3/16" or 4.75mm hard brake lines. Just pass the section of brake line through the pulleys and it will straighten it for you.
2 versions included, 12 and 9 roller versions.
The 12 roller version I have printed and used, It produces a useable straight pipe.
I then designed the 9 roller version with tighter tolerances so should hopefully produce an even better result whilst requiring less filament and hardware. I have not printed the 9 roller version, but expect it to be superior to the 12 roller original.
All model files are marked for use with either the 12 or 9 roller version, the pulley file is common to both.
12 or 9 each of the following parts are required depending on version chosen;