Vertical LED Light Bars using 16x9.28 aluminium profile for the Prusa i3 MK3S/MK3S+ [Fusion 360 source]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical LED Light Bars with 16x9.28 aluminium profiles.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 55
- Wydruki
- 2
- Wyświetlenia
- 806
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
“Vertical LED Light Bars for the Prusa i3 MK3S/MK3S+” modified to use black "Worthy-A" 16x9.28mm aluminium led profiles (24cm each) and mounted on "Remixed Mounts for Vertical LED Light Bars for the Prusa i3 MK3s/MK3s+".
Using "v-tac VT-2835 238" led strips (24V, 17W/m, 2550lm/m) which in this setup take about 7.5W. Connected to prusa i3 MK3S+ power connectors on EinsyRAMBO board (via logic level mosftet driven by raspberry pi GPIO to be able to use OctoPrint to turn on/off lights).
Arms printed in PETG, 40% infill, with supports on build plate only. Caps (two) - no supports needed.
Fusion 360 source file attached, so you can adapt (Solid→Modify→Change parameters) to your profiles easily.
Unfortunately both base projects use quite restricted "Creative Commons (4.0 International License) Attribution" license, so have to follow.