1 / 6
Bixler Hatch Cover With optional FRSky Antenna Holder. — zdjęcie 1
1 / 6

Bixler Hatch Cover With optional FRSky Antenna Holder.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here is a Bixler hatch mount for the rear fuselage. Cut a wedge shape hole on the top side large enough to hold the…

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
140
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Here is a Bixler hatch mount for the rear fuselage. Cut a wedge shape hole on the top side large enough to hold the wedge. Cram all your electronics in then use a ziptie to secure it to the fuse. I printed it in ABS with low infill, I recommend 10-20% in order to keep it light weight. Available in 3 options...

  1. Blank (If you just want the cover)

  2. With a Hole in the center (useful for passing wires to the outside)

  3. With a hole and FRSky Antenna Holder (shown in the picture).

The FRSky Antenna Holder is derived from Carbo's original antenna holder found here... www.thingiverse.com/thing:258146

The cover provided is unmodified from Carbos original V01 Design.

Category: R/C Vehicles

Tagi