Camera Mount for the Foldable Micro H-Quadcopter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update: 4/21/2014 I uploaded "RevB" Which changes to the way the camera mounts to the block. I have not had the chance…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Update: 4/21/2014
I uploaded "RevB" Which changes to the way the camera mounts to the block. I have not had the chance to print one yet, but once I do, I will post a photo. The major change is the camera now mounts behind the front surface of the mount with a small hole for the lens. The lens should land just about flush with the front surface.
Original Description:
This is a camera mount for the Foldable Micro H-Quadcopter. This mounts on the underside of the camera plate which still allows for the Go-Pro or Mobius to be mounted on the upper side. The cutouts are to accomidate the connectors and larger parts on the SecurityCamera2000 Sony 600TVL Board camera.
I am not 100% satisfied with this design, so I may improve it. The biggest part that I don't like is that the camera sticks way out in front which is in a bad place if you happen to crash. I haven't tested FPV yet, but it may also be in the shot of the gopro/mobius. Anyhow I present it here in hopes others will get some use out of it and maybe improve it in ways I haven't thought of.
Instructions
3D print, and mount per photo.
Category: R/C Vehicles