MagDie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This die is made up of 6 pieces held together by a total of 24 neodymium magnets, 3mm in diameter, 1mm thick. The…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This die is made up of 6 pieces held together by a total of 24 neodymium magnets, 3mm in diameter, 1mm thick. The magnets hold the pieces together perfectly fine for rolling but if the die is dropped from a height of a foot or more, it will shatter and need to be reassembled. Exchanging a piece is very easy, all you have to do is give the die a light squeeze and the pieces separate enough to pull one piece out.
Important to note that when you're setting the magnets, make sure you alternate the polarity of each magnet as you go. See the picture for magnet orientation.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
1.2
Infill:
15%
Filament: AMZ3D PLA black and white Post-Printing =============
Category: Dice