Large Checkers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
73 x 11mm Checkers pieces
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 800
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
While camping with relatives my brother got out a LARGE checker set that my grandson enjoyed playing with (stacking and pushing them over). The pieces I made are the same size with a coarser edge and stack very easily.
Not being satisfied with the plain sides I decided to use 3D Builder to emboss his first initial on one side then programmed some cartoon characters which my son and I painted then glued on the other side. Most of the painting was done with round toothpicks instead of brushes. The hard part was mixing the paints to get the colors I wanted.
I am including the files for the Bluey character and the checker with the letter M incase someone wants an example.
I will get the other 15 character files together and upload them to the site soon.
I printed the checkers on their side
15% infill
Support touching buildplate
PLA
The cartoon characters printed flat
100% infill ( only 2mm thick)
no support needed
PLA