Emergency Spare Bearings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have tested these and would trust them to print in an emergency, and some claim to use them full-time.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 1109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I have tested these and would trust them to print in an emergency, and some claim to use them full-time. They are not my design, I simply took the size that worked for my MK3S and one size up and down for tolerances. I embedded numbers in each to help keep track of multiple sizes.
IGUS 8.2mm worked for me, but I included 8.1mm and 8.3mm files
Credit to the original maker: 3drap
https://www.thingiverse.com/thing:1811769/attribution_card
Print instructions
I use Prusament PETG, but some recommend PLA
.1mm Layer Height
100% infill
I don't know enough about the science to have a weighted opinion, but PETG worked for me to test print fine with them under the bed. My logic was I wanted PETG thermal tolerance more than PLA self-lubricating properties.