Anycubic Vyper e3d Hemera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some parts to mount a e3d Hemera or Hemera XS on a Anycubic Vyper
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 1452
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was designed to mount an e3d Hemera on my Vyper. I use ABS for all parts and Klipper for firmware adjustments.
The holes for the Hemera screws are not completely end-to-end and have to be drilled through (3.0 - 3.5 mm).
The extruder board is moved to the position where the extruder/stepper is screwed. The mount fits to this cable chain: https://www.thingiverse.com/thing:4935924
Thats the fan duct from the picture: https://rene-jurack.de/well-engineered-hemera-fan-duct-2/
I had a 40x40x15 fan lying around so I made a funnel for the “5015-ebmpapst blower fan - V6 style”.
20220727: The 40x40x15 fan concept does not work. I use the 2 Vyper 4010 blowers with an adapter now. It is designed to recycle the 2 fan fixing screws from the Vyper toolhead.
20220808: update 1.0.3, position of hemera changed for more stability, glueable BL-touch mount, for Hemera and -XS