Makita Router air diverter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Makita trip router is a popular alternative to a spindle used on CNC machines, but it blows the air down.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 1557
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This fixes the problem of the Makita Trim Router blowing the air downward in a CNC machine. It also acts as a muffler to dampen the high frequency sound coming from the air, motor, and bearings.
The air diverter is held in place by the red spindle lock button and a zip tie. I have used it for many hours and the attachment is incredibly good. The only pressure put on the attachment is the air pressure. Also, this does not limit the air flow to cause overheating. There is full access to the collet locking without removing the diverter.