GPD WIN1 Game pad holder "Epic Ultra"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Epic ultra grip for the GPD Win1
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 441
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A gamepad holder for the GPD win 1 after the design of the " Epic ultra"
Its a simple drop in design that locks on the upper two pins.
Once into position its a solid fit and wont come off.
It grips a ton better then in its original state as all the sharp corners on the edge are gone.
Additional features are added to the air in and outlet as well as on the right speaker side.
Without the grip you pretty much cover the sound outlet all the time which results in practically no or just muffled sound, with the Grip it redirects audio towards the bottom which will be never covered by your hands.
The air inlet is routed to the lower left side of the grip never being covered by anything, ready to breathe in freely.
There is an opening for easy access to the fan switch on the back of the grip.
For a perfect " snap in" experience I do recommend softening the upper two pins with hot air and quickly sliding the GPD win in and press it against its back so the pins find their way snug into the screw holes on the back. after letting it cool down it fits like a glove, is easy to snap in and out with no problem or gap in between the Grip and the device.