1 / 3
1996 Toyota Rav4 Steering Column Phone Mount Holder for iPhone 13Pro — zdjęcie 1
1 / 3

1996 Toyota Rav4 Steering Column Phone Mount Holder for iPhone 13Pro

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

iPhone 13 Pro Toyota Rav4 Phone Mount behind Steering Wheel

Ocena
0 / 5
Polubienia
4
Pobrania
31
Wydruki
1
Wyświetlenia
1453
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
GNU General Public License v2.0

I wanted to put a phone mount behind my steering wheel for navigation on my old 1996 Toyota Rav4.  I have an iPhone 13 Pro that I use on my commutes on the interstate to/from work.  I wanted more of a “heads up” display that let me drive without being distracted looking at my lower dash.  It blocks some of the gauges but I can see the speedometer which is fine for me using cruise control.  This was my v1 of the print.  I recommend cutting a notch at the bottom center to help making removing the phone easier.  I use a velcro strap to hold the base to the steering column.  I used a m4 by 2" threaded bolt with wing nut and washer to hold it together.  The wedge helps angle the phone more toward the driver and can be sanded down or printed at a different angle to adjust for tilt.  I also added a recessed slot to adjust the height of the mount depending on if I wanted to try this out in other vehicles.  I wish I had done this with a better friction mount for angle, but maybe when I teach that to myself in fusion I'll update this to V2.  This is printed on a Voron 2.4 using KVP black ABS and has been fine in my 150+ degree car without any issues for months.  

Tagi