1 / 1
Shopping hanger for car trunk
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanger to prevent your shopping to move in trunk.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
My brother in law had a one in the previous car and asked me could I make simillar one for him. I made two versions, v1 is finner and hinge is weaker, v2 is stronger and hinge is more massive, and has more curved hook. Brother in law chose V1 and it's the one seen on photo.
Print:
- PLA. PETG (I use PETG)
- I use 100% Infill but less could work too
- 0,2 mm layer (I dont have enough experience and maby layer 0,15 mm cause better layer sticking, or higher temperature, its matter for hinges to not brake)
Assembly:
To assebly hinge you need screw (Ø 2,5 mm and lenght atleast 15 mm - for v1, I use a little longer and cut) or nail (Ø 3,3 mm and lenght 80 mm nail with cut off head - for v2). To screw I recommend use self-drilling washer screws.