extruder motor heatsink for prusa mk3s
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
extruder motor heatsink for prusa mk3s.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 193
- Wydruki
- 1
- Wyświetlenia
- 2369
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
extruder motor heatsink for prusa mk3s.
I thought of creating this heatsink because I always thought that the engine heats up too much and can ruin the print quality a little.
because of the heat that enters the filament pusher compartment.
It has been designed to stay in contact with the engine as much as possible and with the air intakes that tick the suction duct, it will suck the air from the bottom and mix it in the center and the fan will pull it out
Print instructions
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2- 0.3
Infill:
10%-20%
Filament: prusament petg petg orange prusa
Notes:
for filling and indicative, for the material I used petg, try also with pla