PEGBOARD BEAD RACK
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My other half does lots of beading. So she needs a place to store a lot of tubes of beads.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 713
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My other half does lots of beading. So she needs a place to store a lot of tubes of beads. Even though we have a "craft room" theres not a lot of space for everything. I came up with the idea of a pegboard unit to put all the beads on the wall.
The pegboard needs to have holes every 25mm. Using M4 Hex nuts and M4x10 (or 12) bolts with appropriate washers allows you to fasten the racks to the peg board.
There are 3 holes / nuts in the model to allow for flexible spacing on the pegboard.
Print instructions
Unassociated tags: peg board
Category: Jewelry Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 10%
Notes:
I found its best to print the racks with the "closed" side down and the openings upwards. You will need to slice the stl at the appropriate height to make a pause for you to place the M4 nuts in the model.