FCS Label Mounting Solution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Filament Color System allows you to produce color reference chips for materials you print and label them.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 431
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Filament Color System allows you to produce color reference chips for to label your materials.
Label Features
- This bracket lets you use FCS chips to quickly label fillament in dry bins, on the wall or where ever you store them.
- There are 4 versions, a single, double, triple and quadruple label bracket.
- The brackets can be screwed using the two counter sunk holes or attached with adhesive.
- They have been designed so FCS chips are easy to remove.
FCS Features
- Easily determine material and brand of past prints. Each chip has the brand and material debossed onto the top face.
- Each chip is 48.2mm x 48.2mm x 2mm. This should be large enough to measure using a spectrophotometer.
- Each chip is 4g of material. Minimal material used and takes ~30min to print.
- Two thicknesses allow you to get a sense of opacity of each color.
- 4mm hole allows chips to be attached to a keychain or piece of string forming a color pallete.
Frequently Asked Questions
Why not use one of the dozens of material chips already on printables/thang/thingiverse?
I wanted each chip to have sufficient information to determine the specific material and reorder it. This is possible by having both the debossed brand and material on each chip. I wasnt able to find a collection of chips elsewhere that had this.
You are missing Brand/Material X!
Leave me a comment and I'll add it! There are ALOT of materials and brands out there. I have added the ones I am aware off but always happy to add more.
Why dont the chips have the color debossed into them?
Primarily because that would result in a magnitude more files to manage and require scrapping alot more data.
Secondly, most people can see the color of each chip. So outside of a few rare cases where a single brand has 2 similair colors of the same material, it shouldnt be an issue.
Print instructions
All models were printed in PLA, 10% infill, no supports.
Chips
| Description | Image | |
|---|---|---|
| FCS Color Chip | A simple color chip |  |
| FCS Texture Chip | A simple texture chip (Coming Soon) | |
| FCS Infill Chip | A simple infill chip |  |
| FCS Blank Chip | A blank chip. Make your own custom chips. |  |
Accessories
| Description | Image | |
|---|---|---|
| FCS Label Mounting Solution | Use this to label what filament is stored in your dry box, Ikea samla or where ever else you want to label filament. |  |
| FCS Label Stand | Use this to see what material you have loaded via a camera feed. |  |
| FCS Storage Box | A simple self contained solution for storing FCS chips. |  |
| FCS Gridfinity Storage Solution | Two storage tray designs to store your FCS chips in your Gridfinity setup. |  |
| FCS ALCH Storage Solution | A simple storage tray design to store your FCS chips in your ALCH setup. |  |
| FCS Skadis Storage Solution | A simple storage tray design to store your FCS chips in your Skadis peg board. |  |