1 / 1
Shower tray waste removal tool — zdjęcie 1

Shower tray waste removal tool

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tool for removing upper part of generic shower tray waste (78mm).

Ocena
0 / 5
Polubienia
4
Pobrania
48
Wydruki
0
Wyświetlenia
669
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

I needed a tool for removing the upper part of a shower tray waste trap so I designed this. It is designed for a trap with a diameter of 78mm. I've included the Fusion360 source file if you'd like to modify it to fit yours.

Printed with PLA using 20% infill, supports (for the handle), and 0.30mm layer height. This seemed to be sufficiently strong enough to remove my waste trap which was all gunked up with silicone. I couldn't get enough torque on the handle using just my hands so I wedged the handle of a wrench in the handle for additional leverage which worked well.

Tagi