FLUVAL AquaClear intake tube strainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents shrimp, snails, etc. from getting stuck inside the filter tube
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 212
- Wydruki
- 1
- Wyświetlenia
- 1125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Public Domain
Tested with my FLUVAL AquaClear 50, but should work on most other AquaClear hang-on-back filters as I believe they all have the same intake tube diameter.
Printing
I printed it with a 0.1mm layer height (but used adaptive layers to cut down on print time) and 3 raft layers for better bed adhesion.
Use in aquarium
I plan to keep this in my aquarium long-term, but you should do your own research about 3D printed parts in aquariums and evaluate your comfort level with it before doing the same. Based on what I read from various sources, PLA should be safe, especially if it is “natural” (no color additives), so I used 3D Solutech Natural PLA, and hopefully that will be fine. I also read that it may biodegrade over time (years), but I can reprint and replace it if that happens.
Modifying
I designed this in OnShape, so the original CAD model can be found here, and an exported STEP file is available below in addition to the printable STL and pre-sliced gcode.