QIDI X-Max Door Handle 4mm Plexiglas

This is only a remix of an existing model from thingiverse. Camo6126 has done a very cool door for the X-MAX which used 8mm plexiglas in order to get an better view of the first layer with a fully closed door. later he did a version for 6mm plexiglas which I currently have on my printer.

However, in order to reduce the production costs of this mod, I decided to create a version with 4mm plexiglas.

Plexiglas dimensions: 400x347x4 [mm]

If you want to have it not that tight to the bottom and the top, you can also use a height of 345mm. For my printer, I have chosen an height of 348mm which is pretty close to the edges for maximum isolation.

For mounting the parts together, you can use every glue you like or screws.

I have personally chosen Acrifix® for glueing the plexiglas in.

You can find it here: https://amzn.to/3z3Y3KU

For the magnets of the door, you can use 12x3mm magnets like these: https://amzn.to/3O3rNM5

The “tight” version:

with the original files, I had the problem of a “hanging” door while it is open. I had to lift it up to close it. The “tight” version should solve this problem. Printing the regular version is safer for compatibility reasons.

With consultation of Camo6126, I am allowed to upload this remix on printables.com under the same licence he has chosen.

I recommend printing extrudr® DuraPro ASA:

Infill: 18% (zig zag)

Layer height: 0,2mm

Line width: 0,4mm

Walls: 3

Top/Bottom: 4

Speed: 60mm/s

Bed temp: 100°C

Print temp: 253°C

My printer: QIDI X-Max https://amzn.to/3nXpOhB

Nozzle: 0,4mm E3D

You can also use an Nano Polymer Adhesive like https://amzn.to/3nXpOhB to get better results.