Rotary Encoder knob Tie Fighter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tie Fighter LCD control knob
- Ocena
- 4,333 / 5
- Polubienia
- 30
- Pobrania
- 93
- Wydruki
- 3
- Wyświetlenia
- 394
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tie Fighter rotary encoder knob, just made this for a bit of fun and to see how it would turn out.
Would probably look better in a lower layer height this one was printed in 0.2mm at 20% with supports touching base only.
Its a snug fit to the encoder knob , I had to run my hobby knife around the spline opening so I could ease it on. I will open the spline up some more and add the revised version once i get the time.
Also this is a new spool so my temps might be too high, I will check in the next day or two and add the results.
UPDATE:
Managed to find out the cause of my models coming out strange , turns out the hotend was partially clogged , but not enough for me to notice.
Ive added a V2 model which is a nicer fit but I found printing in 0.16mm @20% fits and looks better, and I used supports but blocked the support to the spline socket.
Happy Making!
Meganoodle