Dowell pocket jig 30° 1/4"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holds your 1/4" dowell drill bit at a 30° angle. I was repairing a 100 year old cross member from a chair.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 617
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This holds your 1/4" dowell drill bit at a 30° angle.
I was repairing a 100 year old cross member from a chair. I wanted a dowell in there to give it some strength. You could do the same thing with a Kreg Jig, but that is a 3/8" dowell and a 15° angle so that means a longer and wider hole.
Print with some infill so it doesn't get squished when you clamp it in place and have 4-5 perimiters so the drill doesn't cut through it as easily. I would expect this to only last for a handful of holes.
Print instructions
Category: Tools Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: .2
Infill: 25%
Filament: Inland PETG Silver
Notes:
4 perimeters (2 is default)