1 / 2
Furniture foot from 5 liter bottle cap — zdjęcie 1
1 / 2

Furniture foot from 5 liter bottle cap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Another way to reuse a 5 liter bottle cap

Ocena
0 / 5
Polubienia
15
Pobrania
114
Wydruki
0
Wyświetlenia
713
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

I created this model because i needed some foots for a small cabinet. I could not find what i wanted so i made my own, using some 5 liter bottle caps. The caps are made from HDPE, which is very smooth and resilient, allowing to drag the furniture on the floor without creating any damage. The foots are also slightly adjustable from 25mm to about 27.5mm. I printed it in ABS, 6 perimeters, 15% infill, 0.16mm layer height and i tested it, fully tightened, with my weight (100+ kg) and it came out intact. When extended, it should hold about 35 kg without any problem. The problem with the resistance is not about the infill but about the thread, so it is useless to increase the infill density.

Tagi