Blade or anything that needs to be balanced
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to balance a Nitro engine clutch and fan block for a helicopter. As this thing is rotating around 18,000 RPM…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I needed to balance a Nitro engine clutch and fan block for a helicopter. As this thing is rotating around 18,000 RPM it needs to be balanced, especially on a Helicopter. The Balancer i had was not big enough, and so when i saw a DU-Pro balancer on Ebay , i bought it. however it cam without the spindle to balance things, so i made one, and here it is. It's just a conical thumb screw which is attached to the rod that goes through it by a 3M grub screw. You will need two of them, so that the cones will center in the part that you are balancing, Enjoy!
Category: R/C Vehicles