1 / 1
Headset spacer with feedbag, top tube bag mounts — zdjęcie 1

Headset spacer with feedbag, top tube bag mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A more elegant solution to mounting 2 feedbags so the straps don't cross each other. I provided a double & triple…

Ocena
5 / 5
Polubienia
14
Pobrania
92
Wydruki
1
Wyświetlenia
554
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A more elegant solution to mounting 2 feedbags so the straps don't cross each other.

I provided a double & triple mount version. The latter is for additionally mounting a triathlon-style top tube bag.

Spacer is 5 mm tall. Designed for 1-1/8" steerers.

I had some shrinkage issues causing fit problems on my steerer, which I have since solved. It may be a little loose depending on your printer & settings, but even a little loose is fine because everything gets tightened down anyways.

I printed a few out of polycarbonate - they seem quite sturdy at 20% infill. I've banged my knees on it a few times & it hasn't broken.

Inspired by three existing products:

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

.3

Infill:

20

Filament: Protopasta PC White


Notes:

Used a 4 mm brim to help adhesion.

Smooth sheet.

Category: Sport & Outdoors

Tagi