1.125" Threadless stem for 31.8 handlebars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Threadless stem model. 1.125" steerer clamp, 31.8 mm handlebar clamp. I think it's threaded for 5 mm bolts on the…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Threadless stem model. 1.125" steerer clamp, 31.8 mm handlebar clamp. I think it's threaded for 5 mm bolts on the clamp, & 4 mm bolts on the faceplate.
Absolutely unacceptable for 3D printing. This will certainly break. A ton of torque is being transmitted through this thing, & a significant fraction of your body weight. Use this only as a model. If you're machining this, that's okay, just check the wall thicknesses to verify it's safe. I would still be cautious. You could die on this thing if you're not careful.
Category: Sport & Outdoors