1 / 2
Six Sided Dice (Die) ⬢ Hexagon Pips ⬢
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6 sides, with hexagon shaped pips (rather than circles). This is easy to print, with no overhangs.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple six-sided die (dice), 20mm cubed. The pips (markers) are hexagons, rather than circles.
Size Info
- It is 20mm cubed (20mm wide, deep, and tall).
- The pips are 3.2mm across (between the parallel lines).
- Scale this in your slicer for a smaller or larger die.
Printing
- Print in any material you like.
- I recommend at least 3 walls, 3 top and bottom layers, and 25% infill.
- Ensure you have good bed adhesion.
- The 1 pip is at the bottom by default, to maximize surface area to the bed.
- The pips are filleted, so they should be easier to print in ABS.
Dice Tips
If you're unsure how to use these dice, consult this dramatization of an average man's experience keeping dice at-the-ready in a workplace environment.
Key tips for success:
- Carry these two cubes in your pocket
- Don't be afraid to show them
- Leave it the $%#& alone
- Don't $%#& with 'em