Anker 341 (A8346) Steam Deck Dock Enclosure (Updated v2 Design)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converts the Anker 341 USB-C Hub into a Steam Deck Dock. Tolerances were made for printing at 0.3mm layer height.
- Ocena
- 4,5 / 5
- Polubienia
- 19
- Pobrania
- 92
- Wydruki
- 2
- Wyświetlenia
- 1020
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
DESIGN DOES NOT SUPPORT CASES
Converts the Anker 341 (A8346) USB-C Hub into a fully enclosed Steam Deck Dock. V2 Design means new snap design and no more screws needed.
Tolerances were made for printing at 0.3mm layer height.
IMPORTANT! Print the top piece as mesh, if the hubs are fully enclosed they will 100% overheat! (top layers: 0, bottom layers: 0, wall line count: 8, infill pattern: lines, infill density: 22% or less)
Bottom Piece can be printed similarly, your choice. (my bottom is mesh)
Optional Parts
USB-C 3.1 Right Angle Adapter/Extender https://www.amazon.com/dp/B08CDGHQWF