Twist Open Ballpoint Pen - Without spring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Twist Open Ballpoint Pen in which all parts can be printed easily by 3D printing(besides refill)
- Ocena
- 0 / 5
- Polubienia
- 60
- Pobrania
- 245
- Wydruki
- 0
- Wyświetlenia
- 2097
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 16/07/2022
Improved the structure, see the assembly Introduction on images, the previous version assembly video can be a reference:
The cap and Turn-out part now has 2 versions: normal and tight, you can choose anyone you like.
________________________________________________________________________________________________________________
This is a Twist Open Ballpoint Pen in which all parts can be printed easily by 3D printing(besides refill), you can open it by twisting the cap.
The spring is also combined with the parts, so it's no need to buy additional springs.
To ensure the 3D printing spring structure works well, ESUN PLA+ filaments, 0.1 layer height, and 40-60% infill density are recommended. the part with spring needs supports, but don't add supports in the nib hole.
The refill is the Zebra JF series, you can buy it on:
https://www.amazon.com/s?k=Zebra+JF+refill&crid=3754XNSW3FWT2&sprefix=zebra+jf+refill%2Caps%2C501&ref=nb_sb_noss_1
The twisting structure is from my old design carrot pen, but this one needs additional spring, if you like it, you can buy it at:
https://www.cgtrader.com/3d-print-models/gadgets/office/carrot-pen-rotate-open
or
https://www.myminifactory.com/object/3d-print-carrot-pen-rotate-open-195681