Tastenkappe für Cherry MX Tasten / Key cap for Cherry MX Keys
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tastenkappe mit ausgedruckten Tasten-Labeln / Key cap with printed key labels
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 586
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Deutsch (english version below)
Tastenkappe für selbstgebaute Macro-Keyboards
Die Tastenkappe passt auf Cherry-MX Taster und kann mit eigenen Symbolen genutzt werden. Dazu ist auf der Oberseite ein "Fenster" von 14x14 mm in das man die Beschriftung einkleben kann.
Die Beschriftung lässt sich einfach mit einem beliebigen Zeichenprogramm erstellen. Ich habe alle Symbole auf einen Bogen A4 Papier mit 160g/m² ausgedruckt und das dann mit
einer 80µ Laminierfolie laminiert. Damit ist die Beschriftung auch "versiegelt" und nutzt sich nicht so schnell ab. Nach dem Ausschneiden reicht ein Tropfen Klebstoff um das Label in die Vertiefung einzukleben.
Die FreeCAD-Datei ist beigefügt, die Parameter der Tastenkappe sind im Spreadsheet in der Datei hinterlegt, wer also was ändern will muss lediglich die Parameter im Spreadsheet ändern und eine neue STL exportieren.
English
Key cap for self made macro keyboards
This key cap is tailored to fit on Cherry MX keys and you can use it with your own icons. On the top layer there is a small window of 14x14 mm where you can glue in your label.
The label can be created with any drawing program. I printed all symbols that I need ona one sheet of paper with 160g/m² and then I use an office laminating machine and a 80µ laminating pouch to seal the print, so that it doesn't wear out. After cutting the labels
the can be glued in the inset window with just one drop of glue.
The FreeCAD file is provided, all parameters of the key cap are stored in the spreadsheet inside the file. If you want to change anything just edit the parameters in the spreadsheet and export then the resulting STL.