Quest 2 Elite Strap Cable Clip(s) [Old]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
[UPDATE] This design really isn't the best and I've had a second go at the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
[UPDATE]
This design really isn't the best and I've had a second go at the idea: https://www.thingiverse.com/thing:4668735
Simple, short clip design to snap onto the side of the quest 2 and hold a thicker cable for use with oculus link.
The USB-C cable I built this around was the typical Anker one from amazon. It's around 6mm thick. This clip itself isn't perfect right now, so I've included a few different lengths to experiment with how well the clip stays on when the strap bends/moves. You could always try two smaller clips, run tape across the back of the clip (on to the elite strap), or use pc cable-management velcro ties. ;)
If you'd like any more changes/alternatives, send me a message. ♪
Inspired by: "Bionik Mantis mount" from sax_kun:https://www.thingiverse.com/thing:4626447 & "Oculus Cable Clip" by mike-vom-marshttps://www.thingiverse.com/thing:4015669
Printed on Prusa i3 MK3S at 0.3mm layer height and 15% infill.
Category: Electronics