Another Flat/Wallet/Credit Card Multitool [2x]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An old project from a crumby CAD class. Never got to fully test it but it looks cool and might probably work. The…
- Ocena
- 4,5 / 5
- Polubienia
- 44
- Pobrania
- 555
- Wydruki
- 5
- Wyświetlenia
- 2938
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
An old project from a crumby CAD class. Never got to fully test it but it looks cool and might probably work. The print default at 2mm thick. This might not be thick enough to really act as a bottle opener, but going too thick stops the 'card' from fitting inside a foldable wallet. To increase/decrease the thickness, use the scale tool in your slicer. I suggest using PETG if you can, that seemed to be nice and solid.
Features v1:
30-30-60 & 45-60-90 triangles
CM and Inch Rules
Lil' Saw
2-5mm mm holes (could be used for key chain)
6-10mm mm Hex
Untested bottle cap opener
2.5, 2, 1.5, 1mm lines (for drawing)
Various sizes of screwdriver
Features v2:
Larger saw
A single screwdriver
3-10mm
Two bottle openers (crack or 'trapezoid')
Shorter millimeter ruler
30, 45, 60, 90 degree angle cuts
Protractor-like partial curve
Key chain hole
More Practical Inspirations: https://www.thingiverse.com/thing:30273 https://www.thingiverse.com/thing:1597779
Category: Tools