Jerlo SKR Box Bear with Noctua FAN
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a great design for the development of the SKR 1.4 card for the BEAR frameI designed this model for many…
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 513
- Wydruki
- 4
- Wyświetlenia
- 4127
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a great design for the development of the SKR 1.4 card for the BEAR frame
I designed this model for many advantages:
Simplify the maintenance of the electrical part with a door on the outside
Ventilation of the motor drivers by 2 Noctua fan 40x40mm
Optimize the cable routing
Indicate the polarities of the devices
Fix an ESP01 for WIFI
Fix the door by neodymium magnet 3x8mm
Thickness of the box is equal to the thickness of the bear frame
Compatible with version SKR 1.3 but pay attention to the polarity engraved on the box which can be different on certain objects
Compatible with my bear feet https://www.prusaprinters.org/prints/10510-bear-paw
SD card holder at the back of the box
Reset button for fast reboot
Screws :
- Ring_Base : 2xM3x16mm
- Cable_Bed_fixation : 2xM3x16mm
- Card fixation to the box : 4xM3x10mm
- Attaching the base to the bear frame : 2xM5x10mm
I advise you to print each piece separately
Use the "spacer" between the M3x10mm screws and the SKR card so that the screws do not protrude from the side of the heating bed
Print instructions
Layers 0.2mm
Perimeters = 2
PETG / PLA and others like you want