Angel Cat - Remix for FDM printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update: As requested, I've added an Angel Cat solid with Ring to the files. Update: My skills with Meshmixer are…
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 306
- Wydruki
- 3
- Wyświetlenia
- 1348
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Update: As requested, I've added an Angel Cat solid with Ring to the files.
Update: My skills with Meshmixer are getting better. Decided to revisit this remix and post a version with the hollow filled in. Added the file "angel_cat_Solid.stl" which is not hollow and is oriented in the best way I found to print this model with FDM.
I have an adopted cat whose name is Angel. When I saw the design, I had to print it. That's how this remix of a remix happened.
This is a beautiful piece remixed by corpusdemonicum and published as Angel Cat. The original remix is printed on an Anycubic photon dlp printer. I remixed the remix by closing the holes and setting an orientation to print on my HyperCube Evolution.
Update: Added "angel_cat_Remix3.stl" which adds a ring to the design so it can to be hung as an ornament.
Print Settings
Printer:
HyperCube Evolution
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
None or 100% (See text)
Filament:
3D Solutech PLA
White
Notes:
The stl file is oriented to the best printing solution I found.
My slicer settings for hollow version were:- Wall thickness 1.2mm
- Supports set to touching build plate
- Support roof enabled and Z distance at .15mm
- Overhang Angle 55 degrees
- Support Density 15%
My slicer settings for filled version were:
- Wall thickness 1.2mm
- Infill 10% Gyroid
- Supports set to touching build plate
- Overhang Angle 55 degrees
- Support Density 15%
Note
When printing the version with the ornament ring I used 100% fill to add strength to the ring and wings. The design will still print as hollow but the area between the outside and inner walls will be filled.
Category: Decor