Anycubic Kossel Linear Plus Bottom Corner with Extruder Cable Pass Through
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thanks to peaberry for the original design and Johnnyboyye for his remix. All I did is fix an aberration that appeared…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Thanks to peaberry for the original design and Johnnyboyye for his remix.
All I did is fix an aberration that appeared in TinkerCad, and added a cut to allow the extruder cable to be dressed down the beam, under the cover and through the motor mount bracket. This design allows the extruder cable to be hidden from view.
https://www.thingiverse.com/peaberry https://www.thingiverse.com/Johnnyboyye
Print Settings
Printer:
Anycubic kossel Linear Delta Plus
Rafts:
No
Supports:
No
Resolution:
.02mm
Infill:
20%
Notes:
I printed in ABS since it is installed alongside a heated bed.
Edited in TinkerCad.
Category: 3D Printer Parts