Dice Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dice tower I designed for my local D&D club, and is the first 3D object I have uploaded to the internet.
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 815
- Wydruki
- 0
- Wyświetlenia
- 13 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a dice tower I designed for my local D&D club, and is the first 3D object I have uploaded to the internet. I works surprisingly well, and helps prevent cheating on dice rolls.
Print instructions
On an I3 printer, print at the maximum size at 0.3 mm layer height. If you are using a smaller printer, I would recommend printing it in multiple parts. Don't use supports. If you do, they will be too much of a challenge to remove. The print will come out fine without supports. The inside may be a little messy as a result, but people won't really be looking there anyway.