Self Watering Plant Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Self watering Plant Pot 150 mm diameter.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 969
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Self Watering Plant Pot
I have also other pots with water level indicator, see my other printmodels.
The original outer pot is 150 mm in diameter for the inner to fit.
If you wish other dimension you can message me.
This pot is really good and it plenty of room for the plant and water and also holes for air.
I have used for Hortensia, Passion flower (Passiflora incarnata), Plectranthus scutellarioides with very good result and good health of the plant.
It is the soil that is going to suck up the water so when you put soil in make sure it is a little bit wet and pack it so is not air in between. If you don't want the insert pot to be so tight you can scale it x and y some teens of a mm less.
My pot printer settings:
Ender 5 Pro (Cura slicer)
Layer quality 0.16 mm dynamic quaility
Infill 100 %
Speed 150 mm/s
Nozzle 195 C
Bed 60 C deg
No support
Water level indicator settings:
Ender 5 Pro (Cura slicer)
Layer quality 0.16 mm
Infill 10%
Speed 150 mm/s
Nozzle 195 C
Bed 60 C deg
No support
Brim 20 mm wide for the inside part