1 / 2
Xiaomi Scooter AirTag Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting solution for the Apple AirTag to a Xiaomi E-Scooter 1S German Edition. This should probably work for the Pro 2.
- Ocena
- 4 / 5
- Polubienia
- 44
- Pobrania
- 386
- Wydruki
- 3
- Wyświetlenia
- 3827
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 11)Remiksy (0)Kolekcje (64)Powiązane
Introduction
I wanted an almost invisible mount for an Apple AirTag for the e-scooter. The best option here seems to me to be the existing reflectors. I'm not quite sure if these fit the different models in the EU or other countries. I only had a Xiaomi Scooter 1S from Germany to test. There are 2 files to download, one for EU models and one for old M365 models (not tested).
Materials needed
- a pair of longer M3 screws, probably M3*12 and M3*14 will work
- some Loctite, to secure the new screws. The original ones are also secured with it
Mounting
- to mount, remove the existing rear cover on the side with the disc brake, just press with a thin metal pin in the hole in the plastic, then the reflector should come out of the holder. (See Picture 1 below)
- now loosen the two M3 screws and remove the black plastic part, inside are two cross pins that must be removed, because there comes the AirTag. (See Picture 2 below)
- now simply mount again with the printed AirTag holder and the longer M3 screws.
- Reinsert the reflector.
Picture 1
Picture 2
