1 / 2
James Webb - Carina Nebula - Lithophane 110x110mm — zdjęcie 1
1 / 2

James Webb - Carina Nebula - Lithophane 110x110mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Lithophane print depicting the Carina Nebula captured by the James Webb Telescope.

Ocena
5 / 5
Polubienia
101
Pobrania
408
Wydruki
11
Wyświetlenia
3056
Oceny
11

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A Lithophane in the size of 110 x 110 mm depicting the Carina Nebula that was captured with the James Webb Telescope. The Image of the Carina Nebula is framed in a hexagon grid resembling the James Webb Telescope.

It consists of two parts and is a very easy and relatively fast print. It can be put on a desk with a light source behind to illuminate the Lithophane.

 

Instruction

  1. Download the Lithophane and the Grid.
     
  2. Load the Lithophane in your prefered slicer.
     
  3. In your slicer: align the Lithophane model with the Y-Axis



    this ensures minimal movement of your printer head which moves along the X-Axis, causing less vibration and resulting in a cleaner print and faster print time.
     
  4. In your slicer: add four modifier blocks for the supports and enable “For support enforcer only” (s. image above).

    optional: activate a brim in case you have doubts with your bed adhesion
     
  5. Slice and print your Lithophane
     
  6. Print the Grid seperately
     
  7. Assemble the Lithophane and the Grid, depending on your printer some post-processing might be necessary to align them porperly. If everything fits you can glue the two parts together.

 

Specifications

The Lithophane has the following dimension

  • Length: 108.6 mm
  • Width: 100.1 mm
  • Depth: 5.6 mm

and the base holding the Lithophane upright has a dimension of

  • Length: 34 mm
  • Width: 25 mm
  • Thickness: 3 mm

 

Print Settings

  • Infill: 15-20% Gyroid
  • Perimeters: 2-3
  • Layer height: 0.20mm (you can do 0.10 - 0.15 for more details if you want)
  • Supports: on enforcer only

 

Inspiration

The Lithophane is directly inspired by the James Webb Telescope and its captured image of the Carina Nebula. 

The Carina Nebula is a complex area of bright and dark nebulosity in the constellation Carina, located in the Carina–Sagittarius Arm of the Milky Way galaxy. The nebula is approximately 8,500 light-years from Earth (Source: Wiki).

Reference Image (Source: NASA)

Tagi