Harbor Freight box 3 lid insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3 compartmented lid insert for the medium sized box. Print in place, insert w/3 lids
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I remixed it from MyStoopidStuff who made it for the simular stanley organizer boxes that are slightly shorter. This is taller and optimized for printing, no need for think inner walls (just 3 lines thick). I made it a print-in-place model, printed upside down with the insert and all 3 lids in 1 go. You still have to print the knobs, print them slower as they need to be pretty accurate. The lids are slightly different width sized.
It can print in 1hr 44 min with CHEPs Filament friday's Extra fast cura profile.
Use CHEP's profile with a 10mm skirt with a skirt distance of 0 that you then have to peel off, but it leaves a perfect lip that helps keep the insert in tight and it also helps prevent part warping.
After it prints and before moving the lids, insert the paper clip through the holes, then push out the lids from the inside breaking the tiny connections from it printing all in one piece.