Wire Grommet Upgrade for Uplift Desks and others
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a way to add two USB extension cables to the wire grommet on an uplift desk.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 514
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design was born out of the fact the the factory wire grommets on my white uplift desk were not the same color white as my desk. I also wanted to extend the USB ports from the back of my computer to the top of my desk for easier access. So this is what I came up with.
The parts Screw Cover - [Left,Right] will need scaled depending on your printer and filaments. On my heavily modified Ender 3 Pro wehn I printed them at 96% scale they friction fit well.
You will need the following in addition to the 3D Printed Parts:
4x m3x12 Socket head cap screws
4x M3 heat set inserts I used these: https://amzn.to/3o5lmxl
2x USB extension Cables I used these: https://amzn.to/3uR0uxw