1 / 1
Knurled Jog Wheel MK3/MK3S/MK3S+ LCD Knob
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic jog wheel. Fast scrolling with finger on the offset dot. Precise dial-in with the knurled perimeter.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
I think this was the second thing I printed with my MK3 after a calibration print. Honestly, this should be the knob that Prusa ships with these printers.
Print instructions don't matter too much. I typically use the .15mm preset. Use variable layer height to get better resolution of the dome features.
Uses knurledFinishLib_v2 by aubenc, available at: https://www.thingiverse.com/thing:32122