Sapphire Pro v2 - Dragonfly BMO - Orbiter 1.5 - Belt Tensioner - ADXL345
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE 17.02.2022 Added a simple Duct for the 4020 Mod UPDATE 10.02.2022 I was not satisfied with the cooling…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 1127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
UPDATE 17.02.2022
Added a simple Duct for the 4020 Mod
UPDATE 10.02.2022
I was not satisfied with the cooling performance of the component cooler, so I bought new fans that blow properly.
They are 4020 radial fans without an air nozzle, so they may be oversized, but the Sapphire Pro can now unleash its full speed!
All files for this can be found under 4020_mod_xxxx, 2 4020 radial fans have to be bought separately.
Video: https://www.youtube.com/watch?v=EDxo4dc9Lp8
UPDATE 13.01.2022
After hundreds of Simulations: Ducts more powerfull now....
=================================
UPDATE 01.01.2022
Ducts are now removeable, its better to print and i also optimized with CFD Simulations.Overhangs should be better now!
=================================
Remixed from v3 of https://www.thingiverse.com/thing:4583331, great work!
How to mount the Tenistor: https://www.thingiverse.com/thing:3965545
Also added a mount for the heatsink Fan and a mount for the ADXL345 Sensor (Klipper)
In Action: https://youtu.be/mMiMzDRy6ek
Klipper Settings:
[extruder]
step_pin: PD6
dir_pin: PD3
enable_pin: !PB3
microsteps: 16
rotation_distance: 5.034
nozzle_diameter: 0.400
filament_diameter: 1.750
[bltouch]
sensor_pin: ^PA11 # you may got an other pin?
control_pin: PA8 # you may got an other pin?
x_offset: 0
y_offset: -44
z_offset: 3
[safe_z_home]
home_xy_position: 115,143
speed: 50.0
z_hop: 5.0
z_hop_speed: 5.0
[bed_mesh]
speed: 120
mesh_min: 25,5
mesh_max: 210,170
probe_count: 3,3
fade_start: 1
fade_end: 10
Print Settings
Printer:
Sapphire Pro v2
Rafts:
No
Supports:
Yes
Filament:
up to you PETG
Category: 3D Printer Parts