Sherpa Mini Carriage Mount for Prusa Anet A8 E3D v6 BLTouch Nozzlecam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version 3.3 small fix: component_cooler_mount is more stable now. !!!! New version 3.2 !!!! Some improvements have…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 1441
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Version 3.3
small fix: component_cooler_mount is more stable now.
!!!! New version 3.2 !!!!
Some improvements have been made, the cable ties are gone because they were too unstable and there is a holder for the Nozle Cam.
Assembly Video: https://youtu.be/6OJSKmMlmZA
Nozzle Cam at Action: https://youtu.be/DwDvykDdGIE
Nozzel Cam Tutorial: https://youtu.be/Jg_AKzuWCMw
The carriage can either be printed mut support at once or split into two and glued together later.
The duct is optimized by CFD simulation, many thanks to www.simscale.com
If you have virtual endstops with the TMC driver print the spacer X Rod also, I have added a picture of how to take these as a stop
I recommend printing with PETG or ABS in any case!
What is needed?
- Sherpa Mini Extruder
- BLTouch
- 40x40 Fan (Heatsink Fan)
- 5015 Fan (Part Cooling)
- A small piece bowden tube (40mm)
- 2x Lm8uu (ball bearing)
- M3 Screw with Nuts
Klipper Settings
[bltouch]
z_offset: 0.7 # Fine tuning still needs to be done
x_offset: -24
y_offset: 9.8
[extruder]
rotation_distance: 22.67895 #for 5mm Shaft Driven Bondtech gearsets
gear_ratio: 50:10 # 50:10 for standard 10t motor, 50:8 for sherpa mini 8t motor
microsteps: 16
full_steps_per_rotation: 200 #1.8deg Motor
***optional if u dont use endstops
[safe_z_home]
home_xy_position: 134,100
How I Designed This
Category: 3D Printer Parts