Parametric Ruler for Capricorn PTFE tube cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametric ruler for the Capricorn PTFE tube cutter.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A ruler for the Capricorn PTFE tube cutter to easily cut pieces to a specific length. The dimensions of the ruler can be adjusted in the provided FreeCAD file (spreadsheet "Param"). A 65mm example ruler is included as STL file. The actual range is from around 15mm to 50mm. A cutting tolerance of around ±0.5mm can be archived with this. The marker for the ruler can be set in 1mm steps.
The STL files are given in the recommended print orientation.
Printing:
Line Width: 0.48mm
Initial Layer Horizontal Expansion: 0.0 mm
Try to minimize elephant foots for the first layer by adjusting the flow rate or z-offset. A proper line width for the first layer is needed to allow the marker to snap-in properly.