Nuka Cola Bottle from Fallout4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Nuka Cola Bottle to test the Prusa PVB Filament and a bigger Nozzle (0.8)
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 98
- Wydruki
- 2
- Wyświetlenia
- 838
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I modeled the Nuka Cola Bottle from Fallou4 after an original game texture and smoothed it a little bit, also i cut the bottom to make it more printable. With this design i tested my new 0.8 Nozzle upgrade of my anycubic mega, and it worked well, allthougt the bottle wasnt able to hold water.
Its just a fast modeled design, because i didn´t like the other models availabe and wanted to get as close to the original as possible.
Scaled to ~15cm it has the size of a coca cola can and ~0,2l fit inside.
Print the model with ~1-2mm wall sicknes but withouth any infill and no Top layers.
If you cut the model right above the ring at the top you can even fit a real bottle cap on it, like i did with this “Sternburg Export” cap, the german Nuka Cola in case of a Fallout!