1 / 5
cable duct  corner pieces — zdjęcie 1
1 / 5

cable duct corner pieces

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

corner pieces for 15 mm x 15 mm cable duct. The 3d printed pieces fit into the cable duct without screws or glue.

Ocena
5 / 5
Polubienia
106
Pobrania
525
Wydruki
1
Wyświetlenia
4431
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Two different designs are available for different types of corners. 

Only minimal Support material is required for printing.

The exact type of cable duct I used is shown in one of the photos.

Tagi