Allit EuroPlus side rail bucket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
to use every space available in europlus case, the sides can be used to store things. (vase mode to save material)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 441
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
the right and left sides of europlus box from Allit have some unused space.
This model can use this space as a bucket for thin long things or if you tur it over it will close the gap and save things to fall in the hole.
It can be combined with my other euroPlus box bucket model: https://www.printables.com/model/243056-allit-europlus-multiple-side-buckets
Print instructions
- material of you choice
- 0.2 layer height
- spiral/vase mode
- 0.7mm line witdh
- 5 solid bottom layers
- print 2 of them
If you want it to print on a small printer like the prusa mini you have to put it diagonal on the bed, like shown in the picture.
Installation
use double sided tape like on the supplied picture to hold them in place.
See also my other workshop stuff: https://www.printables.com/@Antimaterie/collections/1000059
additional notes
I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.
If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.
In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.
Hope you enjoy my models.